Protect your hard-earned profits.Effortlessly.

Position Sentinel automatically trails your stops multiple ways,
snaps to break-even with one click, and exits or alerts on
high-risk reversals – giving you full-spectrum defense without
a single complicated setting.

Explore pricing

Watch the introduction ↓

Most risk management tools demand that you serve them.
They’re powerful, packed with features, yet quietly drain
the focus you need for price action.

Position Sentinel takes the opposite approach. Set your rules
once in a few clicks, and it stands guard behind every entry.
You stay focused on the only job that matters: reading the market.

When managing your risk becomes the biggest risk

Think about your daily trading routine. You enter a trade and want to trail your stop loss along an indicator plot.

What follows is a tedious cycle: open settings, dig through plots, select the right one, confirm, and return to the chart.

Trade’s done. You take the next setup – only to find NinjaTrader 8 has completely wiped your plot selection. Now you do it all over again.

100 trades. 100 times repeating the exact same chore.

Every time you adjust your Break-Even offset to match shifting price action, you’re trapped in another round of clicks while the market moves on without you.

Traders simply don’t have time for this – especially in scalping, where your edge is measured in seconds. If your risk setup takes 15 seconds to configure, it’s not protecting you – it’s slowing you down.

What you actually need is a tool that’s pre-configured, reacts in real time, and protects your position the second it goes live.

100 trades. 100 times repeating the exact same chore.

That’s why we built Position Sentinel

Instead of fighting clunky menus while the market moves against you, Position Sentinel puts automated trade protection on autopilot  –  across both time-based and Renko charts.

It replaces manual clicks with real-time execution, giving you a full suite of risk-management tools right at your fingertips:

Your Trades. Protected

All chart types

(Time-based, Renko, Tick, or Range)

  • Indicator-based trailing stop
  • Break-even management

Exclusive to Renko charts

  • Fast reversal exit
  • Long-wick stop adjustment
  • Consecutive brick trailing
  • Early reversal warning

Trading multiple contracts? You don’t have to treat them all the same. With Position Sentinel, you can run up to 4 independent Stop Loss configurations simultaneously on a single trade.

Best of all: you set it up once. Your rules stay saved and auto-load on your next trade, and the next hundred after that.

Never reconfigure from scratch again.

Get Position Sentinel ↗Explore the 6 protections ↓

6 shields guarding your trading profits

01 — 06 / PROTECTION SYSTEM

6 shields guarding your trading profits1
6 shields guarding your trading profits2

1. Auto-trail your Stop on any indicator plot – in just 2 clicks

Auto-trail your Stop on any indicator plot

Stop digging through nested menus and reclaim 100% of your focus for reading price action.

Position Sentinel detects every indicator plot on your chart and compiles them into one clean dropdown – just select your line (Moving Average, SuperTrend, Keltner Channel, or any custom plot), flip the switch, and your Stop Loss follows automatically.

Built-in safeguards protect your position from unwanted order behavior: your stop trails strictly in your favor without widening risk or retreating past Break Even, an adjustable tick buffer prevents premature stop-outs from minor spikes, and a smart update cooldown enforces a minimum delay between moves to avoid excessive order modifications.

2. One-click Break Even – or fully automated

One-click Break Even

Static Break-Even rules rarely fit shifting market conditions. Position Sentinel places dedicated Long and Short controls right on your Chart Trader panel – giving you both instant manual execution and hands-free automation.

A single click eliminates risk the moment price moves your way, with no confirmation dialogs or menu hunting.

Prefer automation? Set independent profit triggers and positive tick offsets for Buy and Sell trades – covering commissions so a “Break Even” never disguises a net loss. Whenever volatility shifts, click the inline fields right on the panel to adjust your triggers in 2 seconds.

3. Auto-tighten stops on winning brick streaks

Auto-tighten stops on winning brick streaks

In scalping, the most dangerous moment is often when a trade looks its best – 5 or 8 consecutive bricks in your favor, open profits climbing, and the market stretched thin right before a sharp snapback erases your gains.

Position Sentinel removes emotion from the equation by counting consecutive Renko bricks moving in your direction. Once the streak hits your defined threshold, it automatically tightens your Stop Loss behind each new brick – letting you ride extended momentum while securing the bulk of your profit if price reverses.

A live counter right on your panel tracks the streak in real time, so you always know exactly when protection engages.

4. Exit on high-velocity reversal bricks

Exit on high-velocity reversal bricks

On Renko charts, every brick is the same size – meaning the real signal isn’t price distance, it’s formation speed. When normal bricks take minutes to print, a reversal brick forming in four seconds isn’t noise; it’s aggressive counter-order flow hitting the tape.

Position Sentinel measures brick formation time in real time and closes your position the instant an abnormally fast reversal brick prints – before you can even react.

Choose between 2 sensitivity modes: trigger an exit only when a reversal brick prints faster than every brick in your lookback window for maximum precision, or faster than the recent average for tight-range scalping. Color-coded formation timers also print directly on reversal bricks, giving you an instant visual read on whether momentum is accelerating or fading.

5. Anchor your stop behind rejection wicks

Anchor your stop behind rejection wicks

Long wicks in the direction of your trade are the clearest structural proof on a chart: price tested a zone, encountered real liquidity, and was forcefully rejected.

Instead of relying on arbitrary tick distances or rigid percentages, Position Sentinel automatically shifts your Stop Loss right behind the tip of these rejection wicks – placing your protection behind a level the market itself has defended.

Simply define the minimum wick length in ticks required to qualify as a valid rejection. Once a bar or brick prints a wick meeting your threshold, Position Sentinel immediately trails your stop to that extreme, giving your trade structural defense as price advances.

6. Spot reversals before the brick even closes

Spot reversals before the brick even closes

On standard Renko charts, you normally don’t get a reversal signal until the counter-brick finishes printing – a blind spot where price can move almost a full brick against you while you wait.

Position Sentinel monitors the developing brick in real time and alerts you the moment counter-price action crosses your custom percentage threshold.

In scalping, those extra seconds before the close make all the difference – giving you time to tighten your stop, scale out, or exit completely with your session profits intact. You control the exact percentage sensitivity, and built-in alert deduplication prevents repetitive notifications during choppy price action so you stay focused without distraction.

Get Position Sentinel ↗See multi-contract protection ↓

Now take it further…A separate shield for every contract

Not every trader executes single-contract entries, and a single static Stop Loss rarely fits a scaled position. Whether you trade 2, 3, or 4 contracts at once, Position Sentinel lets you manage up to 4 independent SL/TP setups simultaneously.

Imagine what was never possible before:

You enter 4 contracts at once, and each is protected by a completely different strategy – automatically, in real time, without lifting a finger.

4 independent SL/TP setups simultaneously
4 independent SL/TP setups simultaneously2
ContractAssigned Protection RuleTactical Role in Your Position
Contract 1Rejection wick trailing (tight threshold)Early harvester –
Locks in quick, high-probability base profit first.
Contract 2Automated Break Even (close trigger)Risk neutralizer –
Eliminates downside exposure as early as possible.
Contract 3Indicator plot trailing (Moving Average)Trend rider –
Lets dynamic market structure govern the exit.
Contract 4High-velocity reversal exitRunner guardian –
Holds for extended moves until aggressive counter-flow hits.

4 strategies. 4 roles. Running in parallel from one clean Chart Trader panel. Add each rule row with one click – each governing its own Stop Loss and exit logic.

Here is the breakthrough: when one contract hits its exit condition, Position Sentinel closes only that contract – leaving the other 3 running under their own shields, something standard NinjaTrader 8 ATM setups cannot do.

The panel displays each shield’s live status at a glance – protected, waiting, or counting streaks – and automatically saves your layout for every trade that follows.

Get Position Sentinel ↗Watch live trading ↓

Watch Position Sentinel take over on a live trade

LIVE TRADING 3

Multi-timeframe trading meets smarter trade management

Watch this live trading session as we combine higher-timeframe market confirmation, Poseidon Trident-E entry signals, and Position Sentinel’s Overextended feature to manage trades in real market conditions.

Watch live trading 3 on YouTube ↗

Get Position Sentinel ↗Explore the webinar ↓

WEBINAR

Position Sentinel webinar

A longer session for exploring Position Sentinel, its controls, and its trade-protection workflow.

Watch the webinar on YouTube ↗

Get Position Sentinel ↗Read the FAQs ↓

Got a few “what ifs” on your mind?

1. Isn’t it faster to just drag my stop manually?

We get it completely. Many risk management tools are so bloated with settings that manually dragging your stop actually feels faster.

That’s exactly why Position Sentinel was built to eliminate setup friction.

The interface is built for speed. Trailing a stop behind an indicator? Two clicks: select the plot, flip the switch. Need to adapt your Break Even target on the fly? Click the panel field and update it in under two seconds. No digging, no clicking “Apply”, no losing focus on price action.

Experience Position Sentinel on your own charts. If it doesn’t make your workflow noticeably faster and cleaner, you’re fully covered by our 30-day exchange policy.

2. I don’t trade Renko. Will this still work on my charts?

That’s a fair question, especially since several of Position Sentinel are built specifically for Renko chart.

You can still use Position Sentinel to its full potential. It runs seamlessly on any chart type – Time-based, Renko, Tick, or Range. While the brick-specific tools are a nice bonus if you ever explore Renko later, the core engine is completely chart-agnostic.

Two of its core protection mechanisms work identically across every chart: auto-trailing behind any indicator plot, one-click or automated Break Even. Plus, you still get full multi-contract control to manage up to 4 independent positions at once.

You’re never left guessing – Position Sentinel comes with a comprehensive manual, clear video tutorials, and direct support from our team via email or remote session whenever you need a hand.

3. Won’t 6 features clutter my screen if I only need one or two?

That’s a completely valid concern. You don’t have to use all 6 features. Think of Position Sentinel as a modular toolkit where you only pick what fits your setup: run just indicator trailing, or simply use the one-click Break Even button, and leave everything else untouched.

Everything lives inside one compact control panel – no dozens of tabs, no settings matrix. Each protection layer is simply a clean row you add with a single click, so your screen only displays the exact rules you actually use.

Start with just your favorite rule on a live or sim session. If it doesn’t feel effortless from the very first trade, you’re fully covered by our 30-day exchange policy.

4. Does using Position Sentinel guarantee profitable trades?

Honestly, no – no software can guarantee a winning trade, and we will never make that promise.

Position Sentinel doesn’t predict price or place trades for you. Its sole purpose is to lock in the profits you earn and strip out the errors caused by slow hands or emotional reactions.

The entry is always yours. Once the trade is live, you simply have a dedicated guard watching your back – enforcing Break Even, trailing stops, and fast exits automatically in real time.

While we can’t promise profits, we do guarantee dedicated support. Our team is always on standby to assist you, whether you need help configuring a specific feature or optimizing how Position Sentinel fits your strategy.

Get Position Sentinel ↗Explore 30-day exchange ↓

Choose your Position Sentinel setup

As one of RenkoKings’s newest releases, Position Sentinel arrives during Black November, our largest event of the year.

Position Sentinel and selected combinations are available below standard pricing with an additional 20% reduction applied automatically

P.S. Position Sentinel is currently available for pre-order. Your download link will be sent on November 15, 2026.

POSITION SENTINEL

Position Sentinel

The product download link will be available in 24 hours.

$280

Automated stop management, Break Even, and Renko-specific protection in one tool.

What’s included

  • Position Sentinel
  • 6 protection mechanisms
  • Up to 4 independent SL/TP configurations

Product value: $700

Request this option ↗

SOLUTION OPTION

Position Sentinel + High-Conviction Reversion Solution

$520

Combine position protection with a structured mean-reversion methodology.

What’s included

  • Position Sentinel
  • High-Conviction Reversion Solution
  • Bollinger Reversal Pro, HAMA Monster & Noble POC Band
  • Solution playbook and included gifts
Explore the solution ↗

Request this option ↗

Additional Inclusions

Included with all four Position Sentinel options above.

Personalized Support & Templates

  • Personalized support for the products included in your selected option
  • Assistance with installation, setup, and product use
  • Chart examples, checklists, templates, and practical guidance

OPTIONAL ADD-ON

KingRenko$

Real OHLC Renko Bars for backtesting & live trading

Build Renko charts with real Open, High, Low, and Close data, designed for historical backtesting and live trading while maintaining a familiar ninZaRenko workflow.

  • Real OHLC data for every Renko bar
  • Designed for historical backtesting and live trading
  • Familiar Trend Threshold and Brick Size settings
  • Identical Close prices to ninZaRenko with the same settings

Best for: Renko traders seeking a backtest-ready chart foundation without changing their familiar ninZaRenko workflow.

Recommended for making the most of Position Sentinel’s Renko-specific protection tools. Optional and sold separately from the four offers above.

$166

Explore KingRenko$ ↗

ZUTURE EXCHANGE

30 days to find the right fit

Evaluate it in your real trading conditions.

Explore Position Sentinel using your preferred markets, chart configurations, and trading workflow.

If it isn’t the right fit, eligible purchases may be exchanged for another qualifying product within 30 days of purchase through Zuture Exchange, subject to the program’s terms.

Premium Path status, product eligibility, pricing differences, and other conditions apply. Exchanges are not refunds or returns.

Get Position Sentinel ↗Review Zuture Exchange Policy ↗

Sign in

Log in with your Ninza account to continue.